Phone found! [ 7 ] Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : F0875D16F61AD3EBE837A753A17FA7C8
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : DL183_IT5040_BD_PCB01_gprs_MT6261_S00.IT5040-DL183-ENBN-BD-20171115-SUPN.bin
FileVersion : it5040-DL183-EnBn-BD-20171115-SupN
Saved to : C:InfinityBoxCM2MTKRead_outDL183_IT5040_BD_PCB01_gprs_MT6261_S00.IT5040-DL183-ENBN-BD-20171115-SUPN.bin

Mobile Flash solution

MTK CPU:
1. Firstly setup the MTK USB driver your pc. ( Download MTK Driver).
2. Connect the mobile to pc using USB data cable. Mobile must be switched off and disconnect the battery from mobile.
3. Open the software tools/crack/box for flash. ( Download flash tool ).
4. Browse the flash file from your pc.firmwaer password link
5. No need to press the boot key to connect for flash. (itel it5060 flash file@Firmwaer Download Link )
6. When flash will be done. Please disconnect the mobile battery and connect again. If Mobile battery is