mycell Alien SX3 firmwaer download link
Mobile Flash solution
SPD CPU:
1. Firstly setup the SPD USB driver your pc. ( Download SPD Driver).
2. Connect the mobile to pc using USB data cable. Mobile must be switched off and disconnect the battery from mobile.
3. Open the software tools/crack/box for flash. ( Download flash tool ).
4. Browse the flash file from your pc.
5. Press the boot key( + ) to connect for flash. (Firmwaer Download Link )
6. When flash will be done. Please disconnect the mobile battery and connect again. If Mobile battery is attached, then press the volume up + down + Power button in the same time until restart the mobile. Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand : Spreadtrum
Device Model : n9_sc7715ga_0402
Device CPU : scx15_sp7715ga
Device IntName : n9_sc7715ga_0402
Device Version : 4.4.2
Device Compile : 8/24/2015 10:19:31 AM
Device Project : MYCELL_ Alien SX3_20150824
Device ExtInfo : Alien_SX3
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7715 Loader NAND v1.1 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok! FlashMode Set : Ok!
Detected NAND Flash , Structure detect Ok! [FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Initialize Ok , 0x14 , NAND : b256k
[FW_READER] : Step #3 Passed!
Model Name : n9_sc7715ga_0402
Model Brand : Spreadtrum
Model Device: n9_sc7715ga_0402
AndrVersion : 4.4.2
BaseBand CPU: SCX15_SP7715GA
Project Ver : MYCELL_ Alien SX3_20150824
Model Ext : Alien_SX3[Read Mode] : HSUSB : 0x3000[FW_READER] : Reading Firmware Now …[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv_b256k.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7715_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
[Read Ok] : logo_320x480.bin
[Read Ok] : fblogo_320x480.bin
[Read Ok] : boot.img
[Read Ok] : system_b256k.img
[Read Ok] : cache_b256k.img
[Read Ok] : recovery.img
[Read Ok] : userdata_b256k.img AndroidInfo created
Firmware Size : 293 MiB
Saved to : C:Userssohel skDesktopSCX15_SP7715GA_[NAND_b256k]_n9_sc7715ga_0402_4.4.2_MYCELL__Alien_SX3_20150824_Alien_SX3
Done!
password link free= https://sksoha.com/single.php?id=39&cat=8